Find Your GE Oven Error Code and What It Means
GE ovens and ranges display fault codes when electronic controls detect abnormal temperatures, sensor problems, keypad faults or door-lock issues.
Use this guide to understand common GE oven error codes, identify safe initial checks and recognize when professional repair is needed.
How GE Oven Fault Codes Work
GE, GE Profile and Café ovens use electronic fault codes to help identify operating problems. The exact interpretation and diagnostic procedure can vary by model.
An error code is a starting point for troubleshooting—not proof that one particular part needs replacement. For example, an oven temperature-sensor code may result from the sensor itself, its wiring or an associated control problem.
GE Oven Error Code Chart
Select an error code for a more detailed explanation below.
| Code | Common Meaning | Recommended Action |
|---|---|---|
| F0 / F1 | Keypad or control-panel fault | Service if recurring |
| F2 / F20 | Oven exceeded a temperature threshold | Stop heating |
| F3 / F4 | Oven temperature sensor fault | Sensor circuit diagnosis |
| F5 / F8 | Electronic control fault | Professional diagnosis |
| F6 / F7 | Keypad or control-panel fault | Professional diagnosis |
| F9 | Door-lock circuit fault | Do not force door |
| F350 | Upper cooling-fan circuit or obstruction | Service recommended |
| F96 | Internal component fault | Service recommended |
| LOC | Control Lock enabled | Check settings |
| ERR | Invalid control entry | Review settings |
| OFF | Oven too hot for requested function | Allow cooling |
| ⊃ | Sabbath Mode indicator | Check manual |
GE Oven F0, F1, F5, F6, F7 and F8 Errors
These codes commonly point toward the oven’s electronic control system or keypad. They do not all mean the same component has failed.
Keypad or Control-Panel Fault
GE associates F0 and F1 with a problem in the keypanel on many models.
- Record whether the error appears while the oven is idle or during cooking.
- Check for visibly stuck or damaged buttons.
- Do not spray cleaning liquid directly into the control panel.
- Recurring faults require professional testing.
Electronic Control Fault
GE commonly associates these codes with the electronic control assembly.
- Document the code and operating conditions.
- Use a manufacturer-approved reset only if the appliance is otherwise safe.
- Have the control system diagnosed before replacing parts.
Keypanel Fault
These codes commonly indicate a keypanel problem, including a keypad that is not communicating or responding normally.
- Look for unresponsive or unexpectedly activated controls.
- Avoid continued use if the oven starts functions unexpectedly.
- Professional diagnosis may identify a keypad or related control fault.
GE Oven F2, F20, F3 and F4 Errors
Temperature-related errors deserve attention because they can affect cooking performance and safe operation.
Oven Temperature Exceeded the Limit
GE identifies F2 and F20 when the oven temperature exceeds a programmed threshold.
- Stop the cooking or self-clean cycle.
- Allow the oven to cool naturally.
- If heating continues unexpectedly, disconnect power at the breaker when safe.
- Do not continue operating an oven that repeatedly overheats.
Oven Temperature Sensor Problem
GE commonly associates F3 and F4 with a failed oven temperature sensor.
- Record whether the oven underheats, overheats or stops mid-cycle.
- The sensor, connections and wiring should be tested.
- Do not assume the sensor is the only possible cause.
GE Oven F9, F350 and F96 Errors
Oven Door-Lock Circuit Problem
F9 commonly indicates a fault in the door-lock circuit, particularly relevant to ovens with self-cleaning functions.
- Allow the oven to cool completely.
- Do not force the oven door open.
- Check for obvious obstructions without dismantling the latch.
- Professional testing may be needed for the lock mechanism, wiring or controls.
Upper Cooling-Fan Circuit or Obstruction
F350 commonly points to an upper cooling-fan circuit problem or an obstruction affecting fan operation.
- Stop using the oven if it is overheating or behaving abnormally.
- Keep accessible ventilation openings unobstructed.
- Internal fan and wiring inspection should be performed by a technician.
Internal Component Fault
GE describes F96 as an internal component fault. The specific failed component depends on the oven model.
- Record the complete model number.
- Avoid ordering parts based on the code alone.
- Arrange model-specific diagnosis.
GE Oven LOC, ERR, OFF and Sabbath Mode Messages
Some display messages describe an enabled setting or temporary operating condition rather than a failed part.
Control Lock Enabled
The oven controls are locked to prevent unintended operation. Follow the model’s instructions to disable Control Lock.
Invalid Control Entry
ERR can appear when the control panel receives an invalid setting or sequence. Review the selected function and retry according to the manual.
Oven Too Hot for Requested Function
OFF may appear when the oven is too hot to start self-clean or when a heating function is selected too soon after self-clean. Allow more cooling time.
Sabbath Mode Indicator
A backward-C-shaped symbol may indicate Sabbath Mode. Follow the model-specific instructions to change this setting.
What to Check Before Scheduling GE Oven Repair
These checks do not require removing panels, touching electrical components or working on gas connections.
Record the Exact Error Code
Photograph the display and note whether the error occurs during preheating, baking, broiling, self-cleaning or while the oven is idle.
Identify the Model Number
Use the model label to confirm the correct error-code definition and control procedure.
Check for an Unsafe Condition
Stop using the oven if it overheats, smokes abnormally, heats unexpectedly or has a damaged door-lock mechanism.
Check Control Settings
For LOC, ERR, OFF or Sabbath Mode indicators, consult the manual before assuming a component has failed.
Consider a Power Reset Only When Safe
GE notes that disconnecting power at the circuit breaker for a minute or two may clear some temporary codes. Do not repeatedly reset an appliance with an overheating or electrical hazard.
Request Professional Diagnosis for Recurring Faults
Persistent temperature, keypad, cooling-fan or door-lock errors require testing of the appropriate components and circuits.
When Does a GE Oven Error Need a Technician?
Repeated F2 or F20
Overheating or uncontrolled heating can require prompt diagnosis of the sensor and control system.
Recurring F3 or F4
Temperature sensor and wiring tests can help determine the actual cause.
Persistent F0, F1, F6 or F7
Unresponsive or malfunctioning keypads may require control-panel repair.
F9 or F350
Door-lock or cooling-fan problems may require disassembly and component testing.
Learn more about our oven and range repair services and GE appliance repair throughout King County and Snohomish County, Washington.
GE Oven Error Code FAQ
What does F1 mean on a GE oven?
F1 commonly indicates a keypanel fault. The correct repair depends on the oven model and the results of diagnosis.
What does F2 mean on a GE oven?
F2 indicates the oven temperature exceeded a programmed limit. Stop heating, allow the oven to cool and arrange service if the error returns.
Are GE oven F2 and F20 related?
Yes. GE lists F2 and F20 together as oven over-temperature faults on applicable models.
What does F3 mean on a GE oven?
F3 commonly indicates an oven temperature sensor problem. The sensor circuit should be tested before replacing parts.
What does F9 mean on a GE oven?
F9 commonly indicates a door-lock circuit fault. Allow the oven to cool and do not force a locked door open.
Can I reset a GE oven error code?
Some temporary codes may clear after a manufacturer-approved power reset. Repeated faults and overheating conditions require professional diagnosis.
Does LOC mean my GE oven is broken?
Usually not. LOC typically indicates that Control Lock is enabled. Use the model-specific procedure to unlock the controls.
Do GE Profile and Café ovens use the same error codes?
Many codes overlap, but their meanings and diagnostic procedures may differ by model. Confirm the complete model number before troubleshooting.
Does North Appliance Service repair GE ovens?
We accept GE oven and range repair requests across King County and Snohomish County, subject to model, fault and appointment availability.
GE Oven Error Code Keeps Coming Back?
North Appliance Service diagnoses GE oven and range heating, temperature sensor, electronic control and door-lock problems throughout King County and Snohomish County.
Request GE Oven RepairMonday–Friday, 8 AM–6 PM Pacific · $89 standard diagnostic visit
GE Oven Repair and Troubleshooting Resources
This is an independent troubleshooting guide. Error definitions and repair procedures vary by model. North Appliance Service is not represented as a GE factory-authorized service provider.